The only settings in the bios you need to adjust are the cpu multiplier/frequency, and cpu voltage, first run a stress test at stock to see the baseline of how the temps are, then slightly up the frequency a hair, stress test the cpu again, if it passes try upping the multiplier again, and when it fails add a little more voltage until you can get it to be stable during a stress test. If you are wondering manual overclocking is not hard. You are going to be better off manully dialing an oc in, with auto tools it will try to push the chips to ridiculous voltages, and frequencies, and running cpus with crazy high boltages will degrade te cpus, usually there is a safe voltage for a 24/7 oc on each generation of cpus, skylake usually 1.4 is the max you would want for a 24/7 oc. I really dont know much about overclocking and was going to give it a try but this seems like it might be a good option. ![]() Someone said that I should try Gigabyte's Easytune as it has a auto overclock option.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |